Private Engineering Colleges in Ghaziabad: Will They Survive?

There are some very good Engineering colleges in and around Ghaziabad. These colleges not only topped the annual ranks of formerly UPTU or its later avatars GBTU and MTU, but during these periods they have curved a niche for themselves.

There are colleges like Ajay Kumar Garg Engineering College or AKGEC, ABES, KIET, RKGIT and IMSEC in Ghaziabad which are doing good in imparting Technical Education and already established a brand name in this arena. They draw fair numbers of students every year but there are other colleges which are practically starving due to the lack of students as well as quality students.

The second rung colleges in Ghaziabad:

All the engineering colleges in Western UP (including NCRs ie. Ghaziabad, Noida and Greater Noida) are affiliated to the Mahamaya Technical University, Noida. There are several good colleges in Ghaziabad like Ideal Institute of Technology in Govindpuram, VIET in Dadri, BBDIT in Meerat Road, Sunderdeep Engineering College in Dasna are as good as the private colleges of Karnataka. Then there are VITS, SGIT, LKEC near Jindal Nagar, SIET and RKGEC in Pilakhuwa.

The last rung colleges are the newly established colleges like Bhagwati Institute of Technology in Masuri, Aryan Institute of Technology, Jindal Nagar, Bhagwant Institute of Technology, MAIT in near Jindal Nagar, Satyam, ICE in Pilakhuwa. The problem they are suffering is the lack of students. Last year many seats remained vacant, even the concerned colleges offered more than 15% in commission, still number of students getting admission was very low.

Last year the scenario was very grim, many colleges were finding tough to pay the salaries to their employees. Moreover, as the number of quality students dwindled over the passage of time, pass rate also plunged dramatically.

Just imagine the predicament of the colleges here, in one side the students of the subsequent batches are coming more dull and blunt where as the syllabus has been being modified every third year and every new syllabus is tougher than its previous versions. So, can you guess the outcome? Yes, rapidly falling over all pass rate and the fall of the ranks of these poor colleges. The cascading effects of these events are the sharp fall of the revenue earned by these colleges which in turn makes them unable to pay good salary to its employees which again becomes the cause of mass exodus of the good teachers to the cash rich colleges of Greater Noida and as a result the survival of these colleges gradually becomes tougher. It's a vicious trap and none of the colleges know how to deal with the situation.

Introduction To the Combustion of Fuels

Combustion:

Principle of Combustion:

Combustion is the conversion of a substance called a fuel into chemical compounds
known as products of combustion by combination with an oxidizer. The combustion
process is an exothermic chemical reaction, i.e., a reaction that releases energy as it
occurs.

Thus combustion may be represented symbolically by:
Fuel + Oxidizer = Products of combustion + Energy

Here the fuel and the oxidizer are reactants, i.e., the substances present before the
reaction takes place. This relation indicates that the reactants produce combustion
products and energy. Either the chemical energy released is transferred to the
surroundings as it is produced, or it remains in the combustion products in the form of
elevated internal energy (temperature), or some combination thereof.

Fuels are evaluated, in part, based on the amount of energy or heat that they
release per unit mass or per mole during combustion of the fuel. Such a quantity is
known as the fuel’s heat of reaction or heating value.

Heats of reaction may be measured in a calorimeter, a device in which chemical
energy release is determined by transferring the released heat to a surrounding fluid.
The amount of heat transferred to the fluid in returning the products of combustion to
their initial temperature yields the heat of reaction.

In combustion processes the oxidizer is usually air but could be pure oxygen, an
oxygen mixture, or a substance involving some other oxidizing element such as
fluorine. Here we will limit our attention to combustion of a fuel with air or pure
oxygen.

Chemical fuels exist in gaseous, liquid, or solid form. Natural gas, gasoline, and
coal, perhaps the most widely used examples of these three forms, are each a complex
mixture of reacting and inert compounds. We will consider each more closely later in
the chapter. First let’s review some important fundamentals of mixtures of gases, such
as those involved in combustion reactions.

Therefore, combustion refers to the rapid oxidation of fuel accompanied by the production of heat, or heat and light. Complete combustion of a fuel is possible only in the presence of an adequate supply of oxygen.

Oxygen (O₂) is one of the most common elements on earth making up 20.9% of our air. Rapid fuel oxidation results in large amounts of heat. Solid or liquid fuels must be changed to a gas before they will burn. Usually heat is required to change liquids or solids into gases. Fuel gases will burn in their normal state if enough air is present.

Most of the 79% of air (that is not oxygen) is nitrogen, with traces of other elements. Nitrogen is considered to be a temperature reducing dilutant that must be present to obtain the oxygen required for combustion.

Nitrogen reduces combustion efficiency by absorbing heat from the combustion of fuels and diluting the flue gases. This reduces the heat available for transfer through the heat exchange surfaces. It also increases the volume of combustion by-products, which then have to travel through the heat exchanger and up the stack faster to allow the introduction of additional fuel air mixture.

This nitrogen also can combine with oxygen (particularly at high flame temperatures) to produce oxides of nitrogen (NO_x), which are toxic pollutants.

Carbon, hydrogen and sulphur in the fuel combine with oxygen in the air to form carbon dioxide, water vapour and sulphur dioxide, releasing 8084 kcals, 28922 kcals & 2224 kcals of heat respectively.

Under certain conditions, Carbon may also combine with Oxygen to form Carbon Monoxide, which results in the release of a smaller quantity of heat (2430 kcals/kg of carbon) Carbon burned to CO2 will produce more heat per pound of fuel than when CO or smoke are produced.

C + O₂ → CO₂ + 8084 kCals/kg of Carbon

2C + O₂ → 2 CO + 2430 kCals/kg of Carbon

2H₂ + O₂ → 2H₂O + 28,922 kCals/kg of Hydrogen

S + O₂ → SO₂ + 2,224 kCals/kg of Sulphur

3 T’s of Combustion:

The objective of good combustion is to release all of the heat in the fuel. This is accomplished by controlling the "three T's" of combustion which are

1. Temperature high enough to ignite and maintain ignition of the fuel,
2. Turbulence or intimate mixing of the fuel and oxygen, and
3. Time sufficient for complete combustion.

Commonly used fuels like natural gas and propane generally consist of carbon and hydrogen. Water vapor is a by-product of burning hydrogen. This robs heat from the flue gases, which would otherwise be available for more heat transfer.

Natural gas contains more hydrogen and less carbon per kg than fuel oils and as such produces more water vapor. Consequently, more heat will be carried away by exhaust while firing natural gas.

Too much, or too little fuel with the available combustion air may potentially result in unburned fuel and carbon monoxide generation. A very specific amount of O2 is needed for perfect combustion and some additional (excess) air is required for ensuring complete combustion. However, too much excess air will result in heat and efficiency losses.

Not all of the heat in the fuel are converted to heat and absorbed by the steam generation equipment. Usually all of the hydrogen in the fuel is burned and most boiler fuels, allowable with today's air pollution standards, contain little or no sulfur. So the main challenge in combustion efficiency is directed toward unburned carbon (in the ash or incompletely burned gas), which forms CO instead of CO₂.

                                                                                                                             Subhankar Karmakar