Combustion:
Principle of
Combustion:
Combustion is the conversion of a substance called a fuel into chemical compounds
known as products of combustion by combination with an oxidizer. The combustion
process is an exothermic chemical reaction, i.e., a reaction that releases energy as it
occurs.
Thus combustion may be represented symbolically by:
Fuel + Oxidizer = Products of combustion + Energy
Here the fuel and the oxidizer are reactants, i.e., the substances present before the
reaction takes place. This relation indicates that the reactants produce combustion
products and energy. Either the chemical energy released is transferred to the
surroundings as it is produced, or it remains in the combustion products in the form of
elevated internal energy (temperature), or some combination thereof.
Fuels are evaluated, in part, based on the amount of energy or heat that they
release per unit mass or per mole during combustion of the fuel. Such a quantity is
known as the fuel’s heat of reaction or heating value.
Heats of reaction may be measured in a calorimeter, a device in which chemical
energy release is determined by transferring the released heat to a surrounding fluid.
The amount of heat transferred to the fluid in returning the products of combustion to
their initial temperature yields the heat of reaction.
Therefore, combustion refers to the rapid oxidation of fuel accompanied by the production of heat, or heat and light. Complete combustion of a fuel is possible only in the presence of an adequate supply of oxygen.
Combustion is the conversion of a substance called a fuel into chemical compounds
known as products of combustion by combination with an oxidizer. The combustion
process is an exothermic chemical reaction, i.e., a reaction that releases energy as it
occurs.
Thus combustion may be represented symbolically by:
Fuel + Oxidizer = Products of combustion + Energy
Here the fuel and the oxidizer are reactants, i.e., the substances present before the
reaction takes place. This relation indicates that the reactants produce combustion
products and energy. Either the chemical energy released is transferred to the
surroundings as it is produced, or it remains in the combustion products in the form of
elevated internal energy (temperature), or some combination thereof.
Fuels are evaluated, in part, based on the amount of energy or heat that they
release per unit mass or per mole during combustion of the fuel. Such a quantity is
known as the fuel’s heat of reaction or heating value.
Heats of reaction may be measured in a calorimeter, a device in which chemical
energy release is determined by transferring the released heat to a surrounding fluid.
The amount of heat transferred to the fluid in returning the products of combustion to
their initial temperature yields the heat of reaction.
In combustion processes the oxidizer is usually air but could be pure oxygen, an
oxygen mixture, or a substance involving some other oxidizing element such as
fluorine. Here we will limit our attention to combustion of a fuel with air or pure
oxygen.
Chemical fuels exist in gaseous, liquid, or solid form. Natural gas, gasoline, and
coal, perhaps the most widely used examples of these three forms, are each a complex
mixture of reacting and inert compounds. We will consider each more closely later in
the chapter. First let’s review some important fundamentals of mixtures of gases, such
as those involved in combustion reactions.
oxygen mixture, or a substance involving some other oxidizing element such as
fluorine. Here we will limit our attention to combustion of a fuel with air or pure
oxygen.
Chemical fuels exist in gaseous, liquid, or solid form. Natural gas, gasoline, and
coal, perhaps the most widely used examples of these three forms, are each a complex
mixture of reacting and inert compounds. We will consider each more closely later in
the chapter. First let’s review some important fundamentals of mixtures of gases, such
as those involved in combustion reactions.
Therefore, combustion refers to the rapid oxidation of fuel accompanied by the production of heat, or heat and light. Complete combustion of a fuel is possible only in the presence of an adequate supply of oxygen.
Oxygen (O2)
is one of the most common elements on earth making up 20.9% of our air. Rapid
fuel oxidation results in large amounts of heat. Solid or liquid fuels must be
changed to a gas before they will burn. Usually heat is required to change
liquids or solids into gases. Fuel gases will burn in their normal state if
enough air is present.
Most of the 79% of air (that is not oxygen) is nitrogen,
with traces of other elements. Nitrogen is considered to be a temperature
reducing dilutant that must be present to obtain the oxygen required for
combustion.
Nitrogen reduces combustion efficiency by absorbing heat
from the combustion of fuels and diluting the flue gases. This reduces the heat
available for transfer through the heat exchange surfaces. It also increases
the volume of combustion by-products, which then have to travel through the
heat exchanger and up the stack faster to allow the introduction of additional
fuel air mixture.
This nitrogen also can combine with oxygen (particularly at
high flame temperatures) to produce oxides of nitrogen (NOx), which are toxic pollutants.
Carbon, hydrogen and sulphur in the fuel combine with oxygen
in the air to form carbon dioxide, water vapour and sulphur dioxide, releasing
8084 kcals, 28922 kcals & 2224 kcals of heat respectively.
Under certain conditions, Carbon may also combine with
Oxygen to form Carbon Monoxide, which results in the release of a smaller
quantity of heat (2430 kcals/kg of carbon) Carbon burned to CO2 will produce
more heat per pound of fuel than when CO or smoke are produced.
C + O2 → CO2 + 8084 kCals/kg of Carbon
2C + O2 → 2 CO + 2430 kCals/kg of Carbon
2H2 + O2 → 2H2O + 28,922
kCals/kg of Hydrogen
S + O2 → SO2 + 2,224 kCals/kg of Sulphur
3 T’s of Combustion:
The objective of good combustion is to release all of the
heat in the fuel. This is accomplished by controlling the "three T's"
of combustion which are
- Temperature high enough to ignite and maintain ignition of the fuel,
- Turbulence or intimate mixing of the fuel and oxygen, and
- Time sufficient for complete combustion.
Commonly used fuels like natural gas and propane generally
consist of carbon and hydrogen. Water vapor is a by-product of burning
hydrogen. This robs heat from the flue gases, which would otherwise be
available for more heat transfer.
Natural gas contains more hydrogen and less carbon per kg
than fuel oils and as such produces more water vapor. Consequently, more heat
will be carried away by exhaust while firing natural gas.
Too much, or too little fuel with the available combustion
air may potentially result in unburned fuel and carbon monoxide generation. A
very specific amount of O2 is needed for perfect combustion and some additional
(excess) air is required for ensuring complete combustion. However, too much
excess air will result in heat and efficiency losses.
Not all of the heat in the fuel are converted to heat and
absorbed by the steam generation equipment. Usually all of the hydrogen in the
fuel is burned and most boiler fuels, allowable with today's air pollution
standards, contain little or no sulfur. So the main challenge in combustion
efficiency is directed toward unburned carbon (in the ash or incompletely
burned gas), which forms CO instead of CO2.
