SAMPLE SHEET: GATE 2015; STRENGTH OF MATERIALS (MECHANICAL ENGINEERING)

CRACKGATE EDUCATION

House No: 237; Sector – 5; Chiranjeev Vihar, Ghaziabad

                     Contact No : #9555921800

PRACTICE WORKSHEET GATE-2015

MECHANICAL ENGINEERING

TOPIC: STRENGTH OF MATERIALS

Difficulty Level: 1

SET ONE: Each question has several entries, choose the most appropriate one

01)  The intensity of stress which causes unit strain is called

            a) unit stress                                                     b) bulk modulus

            c) modulus of elasticity                                               d) principal stress

02)  Which of the following materials has poisson’s ratio more than unity

            a) steel                                                                         b) copper

            c) cast iron                                                       d) none of these

03) The change in the unit volume of a material under tension with increase in its Poisson’s ratio will

            a) increase                                                       b) decrease

            c) increase initially and then decrease              d) remain same

04) In a tensile test, near the elastic zone, the tensile strain

            a) increases more quickly                                b) decreases more quickly

            c) increases in proportion to the stress                         d) increases more slowly

05) The stress necessary to initiate yielding is

            a) considerably greater than that necessary to continue it

            b) considerably lesser than that necessary to continue it

            c) remain same to continue it

            d) can’t be predicted

06) Flow stress corresponds to

            a) fluids in motion                                           b) breaking point

            c) plastic deformation of solids                                   d) rupture stress

07) The maximum strain energy that can be stored in a body is known as

            a) impact energy                                              b) resilience

            c) proof resilience                                            d) modulus of resilience

08) Thermal stress is always

            a) tensile                                                          b) compressive

            c) tensile or compressive                                 d) none of these

09) The loss of strength in compression due to overloading is known as

            a) hysteresis                                                     b) relaxation

            c) creep                                                            d) Bouschinger effect

10) If a material expands freely due to heating, it will develop

            a) thermal stress                                               b) lateral stress

            c) creep stress                                                  d) no stress

SAMPLE SHEET: GATE 2015; FLUID MECHANICS (MECHANICAL ENGINEERING)

CRACKGATE EDUCATION

House No: 237; Sector – 5; Chiranjeev Vihar, Ghaziabad

                     Contact No : 09678534833; 09555921800

PRACTICE WORKSHEET GATE-2015

MECHANICAL ENGINEERING

TOPIC: FLUID MECHANICS

Difficulty Level: 1

SET ONE: Each question has several entries, choose the most appropriate one

01) If no resistance is encountered due to displacement then such a substance is called

            a) fluid               b) real gas                 c) ideal fluid          d) visco-elastic fluid

02) The volumetric change of a fluid due to a resistance is called as

            a) volumetric strain,                             b) volumetric index

            c) compressibility                                d) cohesion

03) Mercury does not wet glass due to a property of liquids known as

            a) adhesion                                          b) cohesion

            c) viscosity                                          d) surface tension

04) The surface tension of Mercury at normal temperature compared to that of water is

            a) more                                                          b) less

            c) depends upon the glass tube                        d) equal

05) Kinematic viscosity is dependent upon

            a) pressure       b) distance       c) density         d) flow

06) Alcohol is used in manometers because

            a) it is clearly visible                            b) it provides suitable meniscus

            c) it can provide longer column due to its low density

            d) it has low surface tension

07) The buoyancy depends upon

            a) mass of liquid displaced                  b) viscosity of the liquid

            c) pressure of the displaced liquid       d) none of the above

08) The centre of gravity of the volume of the liquid displaced by an immersed body is called

            a) meta-centre                                      b) centre of gravity

            c) centre of pressure                            d) centre of buoyancy

09) Surface energy per unit area of a surface is numerically equal to

            a) atmospheric pressure                                   b) surface tension

            c) force of cohesion                                         d)  viscosity

10) Flow occurring in a pipeline when a valve is being opened is

            a) steady flow                                                 b) unsteady flow

            c) laminar flow                                                d) vortex flow

For answers contact at 09555921800

SAMPLE SHEET: GATE 2015; THERMODYNAMICS (MECHANICAL ENGINEERING)

CRACKGATE EDUCATION

House No: 237; Sector – 5; Chiranjeev Vihar, Ghaziabad

                     Contact No : #9555921800

PRACTICE WORKSHEET GATE-2015

MECHANICAL ENGINEERING

TOPIC: BASIC THERMODYNAMICS

Difficulty Level: 1

SET ONE: Each question has several entries, choose the most appropriate one

01) Gas laws are applicable to

            a) Gases as well as vapours     b) Gases alone and not applicable to vapours

            c) Gases and Steam                  d) Gases and Superheated vapours

02) An ideal gas compared to a real gas at very high pressures occupies

            a) more volume           b) less volume            

c) same volume           d) can’t be predicted

03) Temperature of a gas is produced due to

            a) its heating value                   b) kinetic energy of the molecules

            c) molecular vibration              d) inter-molecular attractions

04)  According to kinetic theory of gases, the absolute zero temperature is attained when

            a) volume of the gas is zero                             b) pressure of the gas is zero

            c) kinetic energy of the molecule is zero                     d)  specific heat is zero 

05)  The quantity δQ – δW; where δQ is elemental heat transfer and δW is the elemental work    

transfer is

            a) path function                       b) point function

            c) cyclic function                     d) in-exact differential

06)  The workdone in an adiabatic process between a given pair of end states depends on

            a) the values of the endstates only,      b) the end states and specific heat ratio  γ

            c) the end states and polytropic index n,          d) none of the above.

07)  If the value of polytropic index n is high, then the compressor work between given pressure limits will be

            a) less                                      b) more

            c) no effect                              d) zero

08)  A perfect gas at 27^oC is heated at constant pressure till its volume becomes double. The final temperature will be

            a) 54^oC                                    b) 327^oC

            c) 108^oC                                  d) 600^oC

09)  Mixing of ice and water at 0^oC at atmospheric pressure is an example of

            a) reversible process                b) irreversible process

            c) quasi-static process              d) isentropic process

10)  Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant

            a) pressure                               b) temperature

            c) volume                                d) entropy

GATE 2015: MECHANICAL ENGINEERING COACHING IN CHIRANJEEV VIHAR AND GOVINDPURAM GHAZIABAD

GATE 2015

MECHANICAL ENGINEERING COACHING IN

CHIRANJEEV VIHAR AND GOVINDPURAM

THE SALIENT POINTS OF THE COURSE:

• THE COURSE HAS BEEN DESIGNED TO HELP THOSE STUDENTS WHO HAVE DIFFICULTIES IN THE BASIC CONCEPTS.
• AT FIRST THE BASIC CONCEPTS WOULD BE TAUGHT AND THEN ADVANCED CONCEPTS WILL BE INTRODUCED.
• WHILE TEACHING A CONCEPT, SIMULTANEOUSLY MULTIPLE CHOICES QUESTIONS WILL BE SHOWN FROM THAT CONCEPT.
• MORE THAN 2500 MULTIPLE CHOICES QUESTIONS WILL BE DISCUSSED WITH SOLUTIONS.
• PROBLEM SOLVING TECHNIQUES WOULD BE TAUGHT WITH THE HELP OF MASTER CHARTS.
• TWO HOURS PER DAY SIX DAYS PER WEEK CLASSES.
• CLASSES ON IMPROVING LEARNING ABILITIES, INCREASING CONCENTRATION AND THE SCIENTIFIC STUDYING TECHNIQUES WILL BE TAKEN.
• CONCEPTS WOULD BE TAUGHT USING ANIMATIONS, GRAPHS, PICTOGRAMS, MNEMONICS AND OTHER LEARNING ENHANCEMENT TOOLS.
• ONLY 20 STUDENTS PER BATCH TO FOCUS MORE ON THE INDIVIDUAL NEEDS OF THE STUDENTS.
• ASSISTANCES FOR INDIVIDUAL PSU (LIKE ONGC, IOC etc.)
• TRIAL CLASSES ARE THERE TO BE AWARE OF THE PERFORMANCES OF THE CLASSES.
• HIGH TECH STUDY MATERIALS AT AFFORDABLE PRICE.
• COURSE DURATION IS SIX MONTHS.
• INTRODUCTORY PRICES ARE AS LOW AS @₨ 2500 PER MONTH
• CLASSES WILL BE STARTED FROM 25^th JULY; 2014
• CALL AT # +91-9458042791; +91-9555921800; +91-9678534833

CRACKGATE EDUCATION

House No: 237; Sector – 5; Chiranjeev Vihar, Ghaziabad

                     Contact No : +91-9458042791; +91-9555921800; +91-9678534833