MULTIPLE CHOICE QUESTIONS: sub: engg. mechanics. Sub: Engineering Mechanics, Sub Code: EME-202, Semester: 2nd Sem, Course: B.Tech

Q.1) The example of Statically indeterminate structures are,
a. continuous beam,
b. cantilever beam,
c. over-hanging beam,
d. both cantilever and fixed beam.

Q.2) A redundant truss is defined by the truss satisfying the equation,
a. m = 2j - 3,
b. m < 2j + 3, 

c. m > 2j - 3,
d. m > 2j + 3

Q.3) The property of a material to withstand a sudden impact or shock is called,
a. hardness 
b. ductility, 
c. toughness, 
d. elasticity of the material

Q.4) The stress generated by a dynamic loading is approximately _____ times of the stress developed by the gradually applying the same load.

Q.5) The ratio between the volumetric stress to the volumetric strain is called as
a. young's modulus
b. modulus of elasticity
c. rigidity modulus,
d. bulk modulus

Q.6) In a Cantilever beam, the maximum bending moment is induced at
a. at the free end
b. at the fixed end
c. at the mid span of the beam
d. none of the above

Q.7) The forces which meet at a point are called
a. collinear forces
b. concurrent forces
c. coplanar forces
d. parallel forces

Q.8) The coefficients of friction depends upon
a. nature of the surface
b. shape of the surface
c. area of the contact surface
d. weight of the body

Q.9) The variation of shear force due to a triangular load on simply supported beam is
a. uniform 
b. linear 
c. parabolic 
d. cubic

Q.10) A body is on the point of sliding down an inclined plane under its own weight. If the inclination of the plane is 30 degree, then the coefficient of friction between the planes will be

a. 1/√3

b. √3

c. 1

d. 0

11. A force F of 10 N is applied on a mass of 2 kg. What is the acceleration of the mass?

A. 2 m/s²

B. 5 m/s²

C. 10 m/s²

D. 20 m/s²

Answer: B

12. What is the moment of a force of 50 N applied at a distance of 2 meters from a fixed point?

A. 25 Nm

B. 50 Nm

C. 100 Nm

D. 200 Nm

Answer: C

13. A 2000 kg car traveling at 20 m/s collides with a 500 kg car traveling at 10 m/s in the opposite direction. What is the velocity of the cars after the collision?

A. 6.7 m/s

B. 10 m/s

C. 13.3 m/s

D. 16.7 m/s

Answer: A

14. A 500 N force is applied to a 100 kg object on a flat surface. What is the coefficient of static friction if the object is just about to move?

A. 0.5

B. 0.7

C. 0.8

D. 1.0

Answer: D

15. A beam of length 4 m and moment of inertia of 1000 kg/m² is supported at each end. What is the maximum load that the beam can support if it is uniformly loaded?

A. 500 N

B. 1000 N

C. 2000 N

D. 4000 N

Answer: C

16. A block of mass 2 kg is hanging from a string. What is the tension in the string if the block is stationary?

A. 19.6 N

B. 20 N

C. 29.4 N

D. 30 N

Answer: B

17. A roller coaster car of mass 500 kg is traveling at 20 m/s at the bottom of a  loop-the-loop. What is the minimum radius of the loop required for the car to remain in contact with the track?

A. 40 m

B. 50 m

C. 60 m

D. 70 m

Answer: D

18. A body of mass 10 kg is moving with a velocity of 5 m/s. What is the kinetic energy of the body?

A. 50 J

B. 100 J

C. 125 J

D. 250 J

Answer: B

19. A body of mass 5 kg is placed on an inclined plane which makes an angle of 30° with the horizontal. What is the force acting on the body parallel to the plane?

A. 4.9 N

B. 7.5 N

C. 8.7 N

D. 10 N

Answer: B

20. A force of 100 N is applied on a body of mass 20 kg. What is the work done by the force in moving the body through a distance of 5 meters?

A. 250 J

B. 500 J

C. 1000 J

D. 2000 J

Answer: B

21. What is the principle of moments?

A. The sum of the moments about any point of a system in equilibrium is zero.

B. The sum of the forces acting on a system in equilibrium is zero.

C. The sum of the torques acting on a system in equilibrium is zero.

D. The sum of the accelerations of a system in equilibrium is zero.

Answer: A

22. What is the difference between static and dynamic equilibrium?

A. In static equilibrium, there is no motion, while in dynamic equilibrium, there is motion.

B. In static equilibrium, the forces are balanced, while in dynamic equilibrium, the forces are unbalanced.

C. In static equilibrium, the sum of the forces and moments is zero, while in dynamic equilibrium, the sum of the forces and moments is not zero.

D. In static equilibrium, the sum of the forces and moments is not zero, while in dynamic equilibrium, the sum of the forces and moments is zero.

Answer: C

23. What is the moment of inertia?

A. The resistance of an object to angular acceleration.

B. The force required to rotate an object.

C. The distance between the center of mass and the axis of rotation.

D. The angular velocity of an object.

Answer: A

24.What is the difference between stress and strain?

A. Stress is the deformation per unit length, while strain is the force per unit area.

B. Stress is the force per unit area, while strain is the deformation per unit length.

C. Stress is the force applied to an object, while strain is the resulting deformation.

D. Stress is the resistance of an object to deformation, while strain is the resistance of an object to stress.

Answer: B

25. What is Hooke's Law?

A. The stress applied to an elastic material is proportional to the strain produced.

B. The strain produced in an elastic material is proportional to the stress applied.

C. The deformation produced in an elastic material is proportional to the force applied.

D. The force applied to an elastic material is proportional to the deformation produced.

Answer: A

26.What is the difference between a beam and a truss?

A. A beam is a one-dimensional structure, while a truss is a two-dimensional structure.

B. A beam is made up of several members connected at their ends, while a truss is made up of several members connected at their joints.

C. A beam is used to support loads that are perpendicular to its axis, while a truss is used to support loads that are parallel to its axis.

D. A beam is a rigid structure, while a truss is a flexible structure.

Answer: B

27. What is the difference between a force and a moment?

A. A force is a vector quantity, while a moment is a scalar quantity.

B. A force is a scalar quantity, while a moment is a vector quantity.

C. A force is a push or a pull, while a moment is a twist or a turn.

D. A force is a linear motion, while a moment is a rotational motion.

Answer: C

28. What is the center of mass?

A. The point where the weight of an object is concentrated.

B. The point where the forces acting on an object are balanced.

C. The point where the moments acting on an object are balanced.

D. The point where the acceleration of an object is zero.

Answer: A

29. What is the method used to determine the forces in a truss?

A. Method of joints

B. Method of sections

C. Both A and B

D. None of the above

Answer: C

30. In a truss, which members are in tension and which members are in compression?

A. All members are in tension.

B. All members are in compression.

C. Members with angled force vectors are in tension, and members with vertical force vectors are in compression.

D. Members with vertical force vectors are in tension, and members with angled force vectors are in compression.

Answer: C

31. What is the difference between a simple truss and a compound truss?

A. A simple truss is made up of one triangle, while a compound truss is made up of two or more triangles.

B. A simple truss is made up of straight members only, while a compound truss may have curved members.

C. A simple truss is statically determinate, while a compound truss may be statically indeterminate.

D. A simple truss is used for short spans, while a compound truss is used for long spans.

Answer: A

32.How many unknown forces are there in a simple truss?

A. 2

B. 3

C. 4

D. It depends on the number of joints in the truss.

Answer: B

33. What is the method used to analyze a truss with multiple loadings?

A. Superposition method

B. Substitution method

C. Iterative method

D. None of the above

Answer: A

34. What is the maximum number of reactions that can be present in a truss?

A. 1

B. 2

C. 3

D. 4

Answer: B

35. What is the difference between a statically determinate and a statically indeterminate truss?

A. A statically determinate truss has only one solution for the unknown forces, while a statically indeterminate truss may have more than one solution.

B. A statically determinate truss has more unknown forces than the number of equations available to solve them, while a statically indeterminate truss has fewer unknown forces than the number of equations available to solve them.

C. A statically determinate truss is easier to analyze, while a statically indeterminate truss requires more advanced techniques.

D. A statically determinate truss is always more efficient than a statically indeterminate truss.

Answer: C

36. What is the difference between a pinned support and a roller support?

A. A pinned support allows rotation but not translation, while a roller support allows translation but not rotation.

B. A pinned support allows both rotation and translation, while a roller support allows neither.

C. A pinned support is used for horizontal loads, while a roller support is used for vertical loads.

D. A pinned support is always more stable than a roller support.

Answer: A

37. What is the maximum number of members that can be present in a simple truss?

A. 2n-2, where n is the number of joints

B. 2n-3, where n is the number of joints

C. n-1, where n is the number of joints

D. n+1, where n is the number of joints

Answer: B

©subhankar_karmakar

more OBJECTIVE QUESTIONS on ENGINEERING MECHANICS