SYLLABUS OF GATE 2013; MECHANICAL ENGINEERING

Syllabus for Mechanical Engineering (ME)

1) ENGINEERING MATHEMATICS

a) Linear Algebra : Matrix algebra, Systems of linear equations, Eigen values and eigen vectors.

b) Calculus : Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals,Stokes, Gauss and Green’s theorems.

c) Differential equations : First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation.

d) Complex variables : Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series.

e) Probability and Statistics : Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson,Normal and Binomial distributions.

f) Numerical Methods : Numerical solutions of linear and non-linear algebraic equations Integration bytrapezoidal and Simpson’s rule, single and multi-step methods for differential equations.


2) APPLIED MECHANICS AND DESIGN

a) Engineering Mechanics: Free body diagrams and equilibrium; trusses and frames; virtual work; kinematics and dynamics of particles and of rigid bodies in plane motion, including impulse and momentum (linear and angular) and energy formulations; impact.

b) Strength of Materials: Stress and strain, stress-strain relationship and elastic constants, Mohr’s circle for plane stress and plane strain, thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams; torsion of circular shafts; Euler’s theory of columns; strain energy methods; thermal stresses.

c) Theory of Machines: Displacement,velocity and acceleration analysis of plane mechanisms; dynamic analysis of slider-crank mechanism; gear trains; flywheels.

d) Vibrations: Free and forced vibration of single degree of freedom systems; effect of damping; vibration isolation; resonance, critical speeds of shafts.

e) Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints, shafts, spur gears, rolling and sliding contact bearings, brakes and clutches.


3) FLUID MECHANICS AND THERMAL SCIENCES

a) Fluid Mechanics: Fluid properties; fluid statics, manometry, buoyancy; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation; viscous flow of incompressible fluids; boundary layer; elementary turbulent flow; flow through pipes,head losses in pipes, bends etc.

b) Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical analogy, unsteady heat conduction, fins; dimensionless parameters in free and forced convective heat transfer, various correlations for heat transfer in flow over flat plates and through pipes; thermal boundary layer; effect of turbulence; radiative heattransfer, black and grey surfaces, shape factors, network analysis; heat exchanger performance, LMTD and NTU methods.

c) Thermodynamics: Zeroth, First and Second laws of thermodynamics; thermodynamic system and processes; Carnot cycle.irreversibility and availability; behaviour of ideal andreal gases, properties of pure substances, calculation of work and heat in ideal processes; analysis of thermodynamic cycles related to energy conversion.

d) Applications: Power Engineering : Steam Tables, Rankine, Brayton cycles with regeneration and reheat. I.C. Engines : air-standard Otto, Diesel cycles.

e) Refrigeration and air-conditioning: Vapour refrigeration cycle, heat pumps, gas refrigeration, Reverse Brayton cycle;

f) Moist air: psychrometric chart, basic psychrometric processes.

g) Turbo-machinery: Pelton-wheel, Francis and Kaplan turbines— impulse and reaction principles, velocity diagrams.


4) MANUFACTURING AND INDUSTRIAL ENGINEERING

a) Engineering Materials: Structure and properties of engineering materials, heat treatment, stress-strain diagrams for engineering materials.

b) Metal Casting: Design of patterns, moulds and cores; solidification and cooling; riser and gating design, design considerations.

c) Forming: Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes;principles of powder metallurgy.

d) Joining: Physics of welding, brazing and soldering; adhesive bonding; design considerations in welding.

e) Machining and Machine Tool Operations: Mechanics of machining, single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principlesof non-traditional machining processes; principles of work holding, principles of design of jigs and fixtures

f) Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly.

g) Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools.

h) Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning.

i) Inventory Control: Deterministic and probabilistic models; safety stock inventory control systems.

j) Operations Research: Linear programming, simplex and duplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM.

CONCEPTS OF BASIC THERMODYNAMICS

¤ Introduction:

The most of general sense of thermodynamics is the study of energy and its relationship to the properties of matter. All activities in nature involve some interaction between energy and matter. Thermodynamics is a science that governs the following:

• (i) Energy and its transformation
• (ii) Feasibility of a process involving transformation of energy
• (iii) Feasibility of a process involving transfer of energy
• (iv) Equilibrium processes

More specifically, thermodynamics deals with energy conversion, energy exchange and the direction of exchange.

¤ Areas of Application of Thermodynamics:

All natural processes are governed by the principles of thermodynamics. However, the following engineering devices are typically designed based on the principles of thermodynamics.

Automotive engines, Turbines, Compressors, Pumps, Fossil and Nuclear Power Plants, Propulsion systems for the Aircrafts, Separation and Liquefaction Plant, Refrigeration, Air-conditioning and Heating Devices.

The principles of thermodynamics are summarized in the form of a set of axioms. These axioms are known as four thermodynamic laws:

• Zeroth law of thermodynamics,
• First law of thermodynamics,
• Second law of thermodynamics, and
• Third law of thermodynamics.

The Zeroth Law deals with thermal equilibrium and provides a means for measuring temperatures.

The First Law deals with the conservation of energy and introduces the concept of internal energy.

The Second Law of thermodynamics provides with the guidelines on the conversion of internal energy of matter into work. It also introduces the concept of entropy.

The Third Law of thermodynamics defines the absolute zero of entropy. The entropy of a pure crystalline substance at absolute zero temperature is zero.


¤ Different Approaches in the Study of Thermodynamics:

There are two ways through which the subject of thermodynamics can be studied

• Macroscopic Approach
• Microscopic Approach

¤ Macroscopic Approach:

Consider a certain amount of gas in a cylindrical container. The volume (V) can be measured by measuring the diameter and the height of the cylinder. The pressure (P) of the gas can be measured by a pressure gauge. The temperature (T) of the gas can be measured using a thermometer. The state of the gas can be specified by the measured P, V and T . The values of these variables are space averaged characteristics of the properties of the gas under consideration. In classical thermodynamics, we often use this macroscopic approach. The macroscopic approach has the following features.

• The structure of the matter is not considered.
• A few variables are used to describe the state of the matter under consideration. The values of these variables are measurable following the available techniques of experimental physics.

¤ Microscopic Approach:

On the other hand, the gas can be considered as assemblage of a large number of particles each of which moves randomly with independent velocity. The state of each particle can be specified in terms of position coordinates ( x_i , y_i , z_i ) and the momentum components ( p_xi , p_yi , p_zi ). If we consider a gas occupying a volume of 1 cm³ at ambient temperature and pressure, the number of particles present in it is of the order of 10²⁰. The same number of position coordinates and momentum components are needed to specify the state of the gas. The microscopic approach can be summarized as:

• A knowledge of the molecular structure of matter under consideration is essential.
• A large number of variables are needed for a complete specification of the state of the matter.

¤ Zeroth Law of Thermodynamics: 

This is one of the most fundamental laws of thermodynamics. It is the basis of temperature and heat transfer between two systems. Suppose we take three thermodynamic system named System A, System B and System C. Now let that system A is in thermal equilibrium with system B. By thermal equilibrium we mean that there is no heat transfer between system A and system B when they are brought in contact with each other. Now, suppose system A is in thermal equilibrium with system C too and there is no contact between system B and system C. It implies that although system B and C are isolated from each other, they will remain at thermal equilibrium to each other. It means that there will be no heat transfer between system B and C, when they are brought in contact with each other. This is called the Zeroth Law of thermodynamics.


¤ Basis of Temperature: 

When two bodies are kept at contact with each other and if there is no heat transfer between them we say that their body temperatures are same. It means that temperature is the property of a system which decides whether there will be any heat transfer between two different bodies. Heat transfer always occur from a higher temperature body to a lower temperature body. Further whenever there is any heat inflow to a body, it raises its temperature and conversely, if heat outflow occurs from a system it lowers its temperature.

Suppose we take two bodies one of which is at higher temperature than the other. Now when we bring the bodies at contact, heat will be transformed from a higher temperature body to that of lower temperature. Then what will be its effect, we may ask as a result of this heat transfer? Is this heat transfer a perpetual process? Our common life experiences tell us that it will not be the case. Although, at first heat transfer will take place, but its amount will be gradually decreased and after some time, a situation will come when there will be no heat transfer between the bodies or the bodies will come to a state of thermal equilibrium with each other. So, what is the reason for that? Can we justify the situation?

Yes, we can justify it as the hotter body releases heat to the colder body, the temperature of the hotter body decreases where as the temperature of the colder body increases and after sufficient time both the bodies will have equal temperature and a state of thermal equilibrium will be achieved.


¤ Temperature Measurement: 

We know the temperature of a body can be measured with a thermometer. How can we actually calculate the temperature of a body with the help of thermodynamics?


¤ Thermometer:

A thermometer is a temperature measuring instrument. It is made of a thin capillary glass tube, one end is closed and the other end is fitted with metallic bulb full of mercury. The mercury is in thermal equilibrium with the metallic bulb. Therefore, the temperature of the mercury is equal to the temperature of the metallic bulb. 
Mercury has a good coefficient of volume expansion and it means that as the temperature of the mercury increases, its volume increases too and as a result mercury column inside the capillary rises up. 

The capillary tube has been graduated with the help of calibrating with standard temperature sources. Therefore, the temperature of the mercury can be measured from the height of mercury column as the tube is finely graduated. 

Whenever we want to measure the temperature of a body, we kept the body in contact with the metallic bulb of the thermometer. When thermal equilibrium is established between the body and the metallic bulb of the thermoneter, the temperature of both the body will be equal again the metallic bulb is in thermal equilibrium with mercury then the temperature of the mercury will be equal to the temperature of the metallic bulb and the temperature of the object.


As we can measure the temperature of the mercury from the column height, hence we can also determine the temperature of the object as they are equal to each other.

DISCUSSION:
Microscopic basis of temperature and pressure:
Here we shall try to discuss the basis of temperature and pressure only qualitatively, without any mathematical expression. 






.....................contact me at email: subhankarkarma@gmail.com for more notes

BASICS OF THERMODYNAMICS

Thermodynamic Systems: 


If we want to analyze movement of energy over space, then we must define the space that would be used for the observation, we would call it as a System, separated from the adjoining space that is known as "Surroundings", by a boundary that may be real or may be virtual depending upon the nature of the observation. The boundary is called as System Boundary. So, we shall now define a system properly.


A thermodynamics system refers to a three dimensional space occupied by a certain amount of matter known as ''Working Substance'', and it is the space under consideration. It must be bounded by an arbitrary surface which may be real or imaginary, may be at rest or in motion as well as it may change its size and shape. All thermodynamic systems contain three basic elements:


• System boundary: The imaginary surface that bounds the system.
• System volume: The volume within the imaginary surface.
• The surroundings: The surroundings are everything external to the system.


So we get a space of certain volume where Energy Transfer (movement of energy) is going on, what may or may not be real, and distinct, it may be virtual (in case of flow system ), again if real boundary exists, then it may be fixed (rigid boundary like constant volume system) or may be flexible (like cylinder-piston assembly). For a certain experiment the system and surroundings together is called Universe.

The interface between the system and surroundings is called as "System boundary", which may be real and distinct in some cases where as some of them are virtual, but it may be real, solid and distinct. If the air in this room is the system, the floor, ceiling and walls constitutes real boundaries. The plane at the open doorway constitutes an imaginary boundary.



Classification of Thermodynamic Systems:

Systems can be classified as being (i) closed, (ii) open, or (iii) isolated.

(i) Closed System:

A thermodynamic system may exchange mass and energy with its surroundings. There are systems which allow only energy transfer with surroundings in the form of either heat transfer or work transfer or both heat and work transfer between a system and its surroundings. In these types of system, any sorts of mass transfer between the system and its surroundings are prohibited. These types of systems are classified as closed system. Examples of closed thermodynamic systems include a fluid being compressed by a piston inside a cylinder, a bomb calorimeter. In a closed system although energy content may vary over a period of time, but the system will always contain the same amount of matter.

(ii) Open System or Control Volume: 

An open system is a region in space defined by a boundary across which matter may flow in addition to work and heat exchange between the system and the surroundings. So, in an open system, the boundaries must have one or more opening through which mass transfer may take place in addition to work and heat transfer. Most of the engineering devices are examples of open system. Some examples are (a) a gas expanding from a container through a nozzle, (b) steam flowing through a turbine, and (c) water entering a boiler and leaving as steam. The boundary of an open system may be real or imaginary and it is called as control surface. The space inside an open system is called as control volume.

(iii) Isolated System:  

In an isolated system, there is no interaction between a system and its surroundings. Hence, the quantities of mass and energy in these types of system doesn’t change with time or we can say mass and energy remain constant in an isolated system. If there is no change in energy of a system, it indicates that there is neither any kind of heat transfer nor any kind of work transfer.  Our universe as a whole can be regarded as an isolated system.

Property, Equilibrium and State: 

A property is any measurable characteristic of a system. The common properties include: 

• pressure (P)

• temperature (T)

• volume (V)

• velocity (v)

• mass (m)

• enthalpy (H)

• entropy (S)

Properties can be intensive or extensive. Intensive properties are those whose values are independent of the mass possessed by the system, such as pressure, temperature, and velocity. Extensive properties are those whose values are dependent of the mass possessed by the system, such as volume, enthalpy, and entropy. 

Extensive properties are denoted by uppercase letters, such as volume (V), enthalpy (H) and entropy (S). Per unit mass of extensive properties are called specific properties and denoted by lowercase letters. For example, specific volume v = V/m, specific enthalpy h = H/m and specific entropy s = S/m 

*Note that work and heat are not properties. They are dependent of the process from one state to another state.

When the properties of a system are assumed constant from point to point and there is no change over time, the system is in a thermodynamic equilibrium.

The state of a system is its condition as described by giving values to its properties at a particular instant. For example, gas is in a tank. At state 1, its mass is 2 kg, temperature is 160°C, and volume is 0.1 m3. At state 2, its mass is 1 kg, temperature is 80°C, and volume is 0.2  m³..

A system is said to be at steady state if none of its properties changes with time.

State:

It is the condition of a system as defined by the values of all its properties. It gives a complete description of the system. Any operation in which one or more properties of a system change is called a change of state.

Phase:

It is a quantity of mass that is homogeneous throughout in chemical composition and physical structure. Examples of phase are solid, liquid, vapour, gas. Phase consisting of more than one phase is known as heterogenous system, where as if it consists of only one phase, it is called as homogenous system.

Process, Path and Cycle: 

The changes that a system undergoes from one equilibrium state to another are called a process. The series of states through which a system passes during a process is called path.

In thermodynamics the concept of quasi-equilibrium processes is used. It is a sufficiently slow process that allows the system to adjust itself internally so that its properties in one part of the system do not change any faster than those at other parts.

When a system in a given initial state experiences a series of quasi-equilibrium processes and returns to the initial state, the system undergoes a cycle. For example, the piston of car engine undergoes Intake stroke, Compression stroke, Combustion stroke, Exhaust stroke and goes back to Intake again. It is a cycle.

Quasi-static Processes:

Although the processes can be restrained or unrestrained, in practical purpose we need restrained processes.

A quasi-static process is one in which,

• The deviation from thermodynamic equilibrium is infinitesimal.

• All states of the system passes through are equilibrium states.

In a cylinder-piston assembly, several small weights are placed on the piston as shown in the figure. If we remove a weight, the pressure on the enclosed gas will be reduced by an infinitesimal amount. If we remove these weights one by one very slowly, then the pressure on the gas will be reduced by very small amount very slowly. Every time we remove a weight, the equilibrium state will be changed to a new equilibrium state at a very slow rate, such that the system will be appeared at a static condition as the change is infinitesimally small and the rate of change is also very small. The path of the change will be a series of quasi-equilibrium states. These types of processes are known as quasi-static processes.  

Equilibrium States:

A system is said to be in an equilibrium state if its properties will not be changed without some perceivable effect in the surroundings.

• Equilibrium generally requires all properties to be uniform throughout the system.

• There are mechanical, thermal, phase, and chemical equilibrium.

Nature has a preferred way of directing changes. As examples, we can say,

• Water flows from a higher to a lower level

• Electricity flows from a higher potential to a lower one

• Heat flows from a body at higher temperature to the one at a lower temperature

• Momentum transfer occurs from a point of higher pressure to a lower one.

• Mass transfer occurs from higher concentration to a lower one


Equilibrium state will be achieved when there will not be any change of the values of the properties of a system. Neither the system will exchange 
Heat Energy nor any Work exchange nor any kind of mass exchange with its surroundings. There are mainly three kind of Equilibrium and they are as follows.

* Thermal Equilibrium
* Mechanical Equilibrium
* Chemical Equilibrium


Thermal Equilibrium: 

When two bodies are in contact, there will be heat exchange between the bodies if and only there exists a temperature difference (ΔT) between the bodies.

Due to the temperature difference between the bodies, heat will flow from the high temperature body to the low temperature body. 

As a result of this heat transfer, the temperature of the hot body will be decreased and the temperature of the cold body will be increased.

When the temperature of both the bodies becomes equal to each others, the flow of heat stops. This equilibrium condition is known as the Thermal Equilibrium. 


Mechanical Eqiilibrium : 

If there exists a pressure gradient (ΔP) inside a system, between two systems or between a system and its surroundings, then the interface surface will experience a net force not equal to zero and due to which work transfer will happen where the system having higher pressure will do work against the lower pressure system. 

Due to this work transfer, pressure of the high pressure system will be decreased as energy has flown out of the system. On the other hand, the pressure in the low pressure system will be increased. When the pressure becomes equal in both sides, the work energy flow will be stopped and this state is known as the state of Mechanical Equilibrium.;

Chemical Equilibrium:

If there exists a chemical potential (Δμ) within the components of the system or between the system and surroundings, then there will be a spontaneous chemical reaction which will try to neutralize the chemical potential, after sometimes when the chemical potential becomes zero, the reaction stops and then there will not be any more changes in chemical properties of the system. This condition is called Chemical Equilibrium.

When a system attains thermal, mechanical and chemical equilibrium simultaneously, the state of the system is called in a "THERMODYNAMIC EQUILIBRIUM".

INTERNAL COMBUSTION ENGINE (IC ENGINE)

MECHANICAL ENGG : INTERNAL COMBUSTION ENGINE

fig: wankel engine

single cylinder IC engine

IC engine

Definition:

The internal combustion engine is an engine in which the combustion of a fuel occurs with an oxidizer (usually air) in a combustion chamber. In an internal combustion engine the expansion of the high temperature and pressure gases, which are produced by the combustion, directly applies force to a movable component of the engine, such as the pistons or turbine blades and by moving it over a distance, generate useful mechanical energy.

Combustion Type:

• Intermittent Combustion:

The term internal combustion engine usually refers to an engine in which combustion is intermittent, such as the more familiar four-stroke and two-stroke piston engines, along with variants, such as the Wankel rotary engine.

• Continuous Combustion:

A second class of internal combustion engines use continuous combustion: gas turbines, jet engines and most rocket engines, each of which are internal combustion engines on the same principle as previously described.

Uses and Applications:

Internal combustion engines are most commonly used for mobile propulsion in vehicles and portable machinery. In mobile equipment, internal combustion is advantageous since it can provide high power-to-weight ratios together with excellent fuel energy density. Generally using fossil fuel (mainly petroleum), these engines have appeared in transport in almost all vehicles (automobiles, trucks, motorcycles, boats, and in a wide variety of aircraft and locomotives).

Internal combustion engines appear in the form of gas turbines as well where a very high power is required, such as in jet aircraft, helicopters, and large ships. They are also frequently used for electric generators and by industry.

Combustion Mechanism:

All internal combustion engines depend on the exothermic chemical process of combustion: the reaction of a fuel, typically with oxygen from the air (though it is possible to inject nitrous oxide in order to do more of the same thing and gain a power boost). The combustion process typically results in the production of a great quantity of heat, as well as the production of steam and carbon dioxide and other chemicals at very high temperature; the temperature reached is determined by the chemical make up of the fuel and oxidisers.

Types of Fuels it uses:

The most common modern fuels are made up of hydrocarbons and are derived mostly from fossil fuels (petroleum). Fossil fuels include diesel fuel, gasoline and petroleum gas, and the rarer use of propane. Except for the fuel delivery components, most internal combustion engines that are designed for gasoline use can run on natural gas or liquefied petroleum gases without major modifications. Large diesels can run with air mixed with gases and a pilot diesel fuel ignition injection. Liquid and gaseous biofuels, such as ethanol and biodiesel (a form of diesel fuel that is produced from crops that yield triglycerides such as soybean oil), can also be used. Some engines with appropriate modifications can also run on hydrogen gas.

Comparison of IC Engine with Steam Engine:

a) Both IC engine and steam engine are basically heat engines used to convert heat energy into mechanical energy.

b) In IC engine, the combustion of fuel (liquid or gas) takes place inside the engine cylinder. Where as, in steam engine combustion occurs outside engine, in a boiler to raise the temperature which in turn is used in the heat engine.

c) The working temperature and pressure inside an IC engine are much higher than that of steam engine. It requires the design be robust and strong temperature and pressure resistant.

d) IC engines are mostly single acting while most of the steam engines are double acting. Hence, no need of stuffing box in IC engines.

e) IC engine produces high efficiency in the range of 35% to 40%, while steam engine can produce work with an efficiency in the range of 10% to 15%.

f) Compared to long starting procedure of a steam engine, an IC engine can be started instantenously.

Classification of IC engines:

IC engines can be classified on different characteristics basis.

a) Type of Ignition process: i) Spark Ignition or SI engine, ii) Compression Ignition or CI engine, iii) Hot spot ignition engine.	b) Type of Fuel used: i) Petrol/Gasoline engine, ii) Diesel engine, iii) Gas engine.	c) Number of Strokes per cycle: i) Four stroke engine, ii) Two stroke engine.
d) Type of Cooling system: i) Air cooled engine, ii) Water cooled engine, iii) Evaporative cooling engine.	e) Cycle of Operation: i) Otto cycle engine, ii) Diesel cycle engine, iii) Dual cycle engine.	f) Method of fuel injection: i) Carburettor engine, ii) Air injection engine, iii) Airless or solid injection engine.
g) Arrangement of Cylinders: i) Vertical engine, ii) Horizontal engine, iii) Radial engine, iv) V engine, v) Opposed cylinder engine, vi) Opposed piston engine.	h) Application fields: i) Stationary engine, ii) Automotive engine, iii) Marine engine, iv) Aircraft engine, v) Locomotive engine.	i) Valve Locations: i) Over-head valve engine, ii) Side valve engine.
j) Speed of the engine: i) Slow speed engine, ii) Medium speed engine, iii) High speed engine.	k) Method of Governing: i) Hit and Miss governed engine, ii) Qualitatively governed engine, iii) Quantatively governed engine.

TERMINOLOGY: IC ENGINE

BORE: The inside diameter of the cylinder is known as bore. It is always measured in mm. 

STROKE: The distance travelled by the piston from one of its dead center positions to the other dead center position. 

DEAD CENTERS: They correspond to the positions occupied by the piston at the end of its stroke where the center lines of the connecting rod and crank are in the same straight line. These conditions arise at two specific positions of the piston. At the start of the journey of stroke and at the end of the stroke are these two specific conditions, which are named as Top Dead Center (TDC) and Bottom Dead Center or BDC for vertical engines and IDC or Inner Dead Center and ODC or Outer Dead Center for horizontal engines. 

TDC: The top most position of the piston towards the cover end side of the cylinder of a vertical engine is called Top Dead Center or TDC. 

BDC: The lowest position of the piston towards the crank end side of the cylinder of a vertical engine is known as BDC. 

CRANK THROW/ CRANK RADIUS: The distance between the center of main shaft and center of crank pin is known as Crank Throw or Crank Radius. This distance will be equal to half the stroke length. 

PISTON DISPLACEMENT/ SWEPT VOLUME: It is the volume through which the piston sweeps for its one stroke. Swept Volume is represented by Vs and it is equal to cross-sectional area of the piston x stroke length. 

Vs = {(π x d²)/4} x stroke length (L)
∴ Vs = (π.d².L)/4
CLEARENCE VOLUME: It is the volume included between the piston and the cylinder head when it is at TDC (for vertical engines) or IDC (for horizonal engine). The piston can never enters this portion of the cylinder during its travel. Clearence volume (Vc) is generally expressed as percentage of the swept volume and is denoted by Vc. 

COMPRESSION RATIO: It is the ratio of the total cylinder volume to the clearance volume. If swept volume is (Vs) and clearance volume is (Vc) then total volume of the cylinder V = Vs + Vc and Compression Ratio will be equals to (Vs + Vc)/Vc. For petrol engine it varies from 5:1 to 9:1 and for diesel engines from 14 : 1 to 22 : 1. 

PISTON SPEED: It is the distance travelled by piston in one minute. If rpm of engine shaft is (N) and length of stroke is (L), then piston speed will be 2LN m/min. 

TERMINOLOGY:

(i) Internal combustion (IC): The internal combustion engine is an engine in which the combustion of a fuel occurs with an oxidizer (usually air) in a combustion chamber. In an internal combustion engine the expansion of the high temperature and pressure gases, which are produced by the combustion, directly applies force to a movable component of the engine, such as the pistons or turbine blades and by moving it over a distance, generate useful mechanical energy.

(ii) Spark Ignition(SI): An engine in which the combustion process in each cycle is started by use of a spark plug.

(iii) Compression Ignition(CI): An engine in which the combustion process starts when the air fuel mixture self ignites due to high temperature in the combustion chamber caused by the high compression. CI engines are often called diesel engines especially in the non technical community.

(iv) Top-Dead-Center (TDC): Position of the piston when it stops at the furthest point away from the crankshaft. Top because this position is at the top of most engines (not always) and dead because the piston stops at this point. Because in some engines top-dead-center is not at the top of the engine (e.g., horizontally opposed engines, radial engines, etc.,), some sources call this position Head-End-Dead-Center (HEDC). Some sources call this position Top-Center (TC). When an occurrence in a cycle happens before TDC, it is often abbreviated bTDC or bTC. When the occurrence happens after TDC or a TC. When the piston is at TDC, the volume in the cylinder is a minimum called the clearance volume.

(v) Bottom-Dead-Center (BDC): Position of the piston when it stops at the point closest to the crankshaft. Some sources call this Crank-End-Dead-Center(CEDC) because it is not always at the bottom of the engine. Some sources call this point Bottom-Center(BC). During an engine cycle things happen before Bottom-Dead-Center, bBDC or bBC, and after bottom-deadcenter, aBDC or aBC.

(vi) Direct Injection:Fuel injection into the main combustion chamber of an engine. Engines either have one main combustion chamber (open chamber) or a divided combustion chamber made up of a main chamber and a smaller connected secondary chamber.

(vii) Indirect injection: Fuel injection into the secondary chamber of an engine with a divided combustion chamber.

(viii) Displacement volume: Volume displaced by the piston as it travels through one stroke. Displacement cans b given for one cylinder or for the entire engine (one cylinder time’s number of cylinders). Some literature calls this swept volume.

(ix) Gasoline Direct Injection (GDI): Spark ignition engine with fuel injectors mounted in combustion chambers. Gasoline fuel is injected directly into cylinders during compression stroke.

(x) Homogeneous Charge Compression Ignition (HCCI): Compression-Ignition engine operating with a homogeneous airfuel charge instead of the diffusion combustion mixture normally used in CI engines.

(xi) Smart Engine: either computer controls that regulate operating characteristics such as air fuel ratio, ignition timing, valve timing, exhaust control, intake tuning, etc.Computer inputs come from electronic, mechanical, thermal and chemical sensors located throughout the engine. Computers in some automobiles are even programmed to adjust engine operation for things like valve water and combustion chamber deposit build up as the engine ages. In automobiles, the same computers are used to make smart cars by controlling the steering, brakes, exhaust system, suspension, seats, anti-theft systems, sound-endear analysis navigation entertainment systems, shifting, doors, noise, suppression, environment, comfort,etc.(o) Engine Management System: Computer and electronics used to control smart engines.

(xii) Wide- Open throttle (WOT): Engine operated with throttle valve fully open when maximum power and/or speed is desired.

(xiii) Ignition Delay (ID): Time interval between ignition initiation and the actual start of combustion.

(r) Air Fuel Ratio: Ratio of mass air to mass of fuel input into engine.

(xiv) Fuel-Air ratio: Ratio of mass of fuel to mass of air input into engine.

(xv) Brake Maximum torque: (BMT): Speed at which maximum torque occurs.

(xvi) Overhead Valve (OHV): Valves mounted in engine head.

(xvii) Overhead Cam (OHC): Camshaft mounted in engine head, giving more direct control of valves which are also mounted in engine head.

(xviii) Fuel Injection (FI):

MAIN ENGINE COMPONENTS:

The following is the list of major components found in most reciprocating internal combustion engines.

• Block: Body of engine containing the cylinders made of cast iron or aluminum. In many older engines the valves and the valve ports were contained in the block. The block of water cooled engines includes a water jacket cast around the cylinders. On air cooled engines the exterior surface of the block has cooling fins. 

• Camshaft: Rotating shaft used to push open valves at the proper time in the engine cycle either directly or through mechanical or hydraulic linkage (push rods, rocker arms, and tappets). Most modern automobile engines have one or more camshafts mounted in the engine head (Overhead cam). Older engines had camshafts in the crank case. Crankshafts are generally made of forget steel or cast iron and driven off the crankshaft by means of a belt or chain (Timing chain). To reduce weight, some cams are made from a hollow shaft with the cam lobes press-fit on. In four stroke cycle engines the camshaft rotates at half engine speed.

• Carburetor: Venturi flow device that meters the proper amount of fuel into the air flow by means of pressure
  differential. For many decades it was the basic fuel metering system on all automobile (and other) engines. It is still used on low cost small engines like lawn mowers but is uncommon on new automobiles.

• Catalytic converter: Chamber mounted in exhaust flow containing catalytical material that promotes reduction of emission by chemical reaction.

• Choke: Butterfly valve at carburetor intake, used to create rich fuel-air mixture in intake system for cold weather starting.

• Combustion chamber: The end of the cylinder between the head and the piston face where the combustion occurs. The size of the combustion chamber continuously changes from a minimum volume when the piston is at TDC to a maximum when the piston is at BDC. The term cylinder is sometimes synonymous with combustion chamber (e.g., the engine was firing on all cylinders). Some engines have open combustion chambers which consist of one chamber for each cylinder.

• Other engines have divided chambers which consist of dual chambers on each cylinder connected by an orifice passage.

• CRANK CASE: In IC Engine terminology, Crank Case is the housing of Crank Shaft. It is the largest cavity in engine and is fixed to cylinder. 
  
  
  
  
  

OCTANE AND CETANE NUMBERS

Self ignition temperature (SIT) of a fuel is the temperature at which the fuel ignites on its own without spark. If large amount of mixture in an engine cylinder auto ignites, there will be a rapid rise in pressure causing direct blow on engine structure accompanied by thudding sound. This causes vibrations in the engine. The phenomenon is called knocking.

If however, a small pocket of fuel-air mixture auto ignites, pressure waves are generated which travel with the speed of sound across the cylinder. These pressure waves are of such small duration that indicator diagram mechanism fails to record them. These waves interact within themselves and with the cylinder walls, creating characteristics ping sound. The phenomenon is called pinking.

The engine runs rough, overheats and loses efficiency due to knocking and pinking.

The processes of knocking and pinking are related to the nature of the fuel and relative merits of the fuel are decided on the basis of their anti-pinking and anti-knock property. The merit is measured by octane number such that a fuel of high octane number will be liable to less pink or knock as compared to a fuel of low octane number in the same engine. It is important to note that the same fuel will show same tendency to pink or knock in all engines.

Commonly used fuel in SI engines is a mixture of iso-octane and n-heptane. Iso-octane has minimum tendency to knock and this fuel is arbitrarily assigned an octane number of 100 (ON = 100) where as n-heptane has maximum knocking tendency with ON = 0. The octane number of a given fuel is percentage of iso-octane in the mixture of iso-octane and n-heptane. Thus a fuel other than mixture of iso-octane and n-heptane if assigned an ON of 80, it means, it will knock under standard operating condition similar to the mixture of 80% iso-octane and 20% n-heptane.

The tendency to knock in an engine increases with the increase in compression ratio. The highest compression upto which no knocking occurs in a given engine is called highest useful compression ratio (HUCR).

Certain chemical compounds when added to the fuel successfully suppress the knocking tendency. Tetra-ethyl lead [Pb(C₂ H₅)₄] also commonly called TEL and tetra-methyl lead [Pb(CH₃)₄] also referred to as TML are effective dopes in the automobile fuel to check knocking. They are called as anti-knocking agents. However, because of lead poisoning effects TEL and TML are not being used now-a-days. In stead, some organic auto knocking agents have been developed to check the undesirable effects like knocking.

In CI engine air alone is compressed to a compression ratio of 15 to 20 (commonly). The fuel is injected under a pressure of 120 to 210 bars about 20° to 35° before TDC. As the fuel in the engine starts to evaporate the pressure in the cylinder drops and it delays the ignition process by a small amount. The time between beginning of injection and the beginning of combustion is known as the delay period which consists of time for atomization, vapourization and mixing along with time of chemical reaction prior to auto-ignition. The combustion of fuel continues in the expansion and is called after burning. Increased delay period causes accumulation of atomized fuel in the combustion chamber and as the pressure and temperature continue to rise at one instant, the bulk of fuel auto-ignites. This would result in high forces on the structure of the engine causing vibration and rough running.

The CI engine fuel rating is based on ignition delay and is measured in terms of cetane number. Cetane fuel [C₁₆ H₃₄] has very low delay period and is arbitrarily assigned a cetane number of 100. Another fuel a α-methyl-napthalene [C₁₁ H₁₀] has poor ignition quality and is assigned zero cetane number. The volume percentage of cetane in a mixture of cetane and a-methyl naphthalene is the cetane number of the fuel that produces same delay period as the mixture under specified test conditions. Additives such as methyl nitrate, ethyl thio-nitrate and amyl nitrate increase cetane number of a fuel respectively by 13.5%, 10% and 9% if added to the extent of 0.5%.

MOCK CLASS TEST: THERMODYNAMICS Sub: Code: EME-303; Mahamaya Technical University

Time: 2 hrs                                                                                                   Maximum Marks: 50 

Attempt all the questions: 

SECTION A: 

1) Attempt the following questions:                                                                        (5 x 2 = 10) 

a) Define system, surroundings and universe. 

b) Distinguish between Heat pump and Refrigerator. 

c) What is Exergy and Anergy? 

d) Explain the law of degradation of energy. 

e) What is triple point of water? 

SECTION B: 

2) Attempt any three questions:                                                                               (3 x 5 = 15) 

a) Distinguish between macroscopic and microscopic approaches of thermodynamics. 

b) Discuss the neccessity of 2nd law of thermodynamics. 

c) 2 kg of a gas at 10 bar expands adiabatically and reversibly till its pressure drops to 5 bar. During the process 120 kJ of non-flow work is done by the system and the temperature drops from 377°C centigrade to 257°C. Calculate the value of the index of expansion and the characteristics gas constants. 

d) Steam at a pressure of 4 bar absolute and having dryness fraction 0.8, is heated at constant volume to a pressure of 8 bar absolute. Find the final temperature of the steam. Also, find the total heat absorbed by 1 kg of steam. 

e) 2 kg of air at NTP is heated at constant volume untill the pressure becomes 6 bar. Find the change of entropy of the system. 

SECTION C: 

Attempt part (a) or part (b) of the following questions                                                 (5 x 5 = 25) 

3) (a) Explain the thermodynamic equilibrium and quasi-static process. 

(b) Prove the equivalence of Kelvin-Planck statement and Clausius statement. 

4) (a) A steam turbine developing 110 kW is supplied steam at 17.5 bar with an internal energy of 2600 kJ/min, specific volume = 15.5 m³/kg and velocity of 275 m/s. Heat loss from the steam turbine  37.6 kJ/kg. Neglecting the changes in potential energy, determine the steam flow rate in kg/hr. 

(b) A reversible engine takes 2400 kJ/min from a reservoir at 750 K develops 400 kJ/min of work during cycle. The engine rejects heat at two reservoir at 650 K and 550 K. Find the heat rejected to each sink. 

5) (a) Explain the causes of internal and external irreversibility. 

(b) Explain the importance of Gibb's function and Gibb's free energy. 

6) (a) 5 kg steam at pressure 8 bar and temperature 300°C is adiabatically mixed with 4 kg steam at 6 bar and 250°C. Find the final condition of the mixture. Also find the change in entropy. 

(b) Hot steam is flowing through a perfectly adiabatic pipe. At point A the temperature of the steam is 250°C and pressure is 4 bar, while at the point B, its temperature is 275°C and pressure is 3.5 bar. Find the direction of the flow. 

7) (a) 5 kg of Oxygen is enclosed within a vessel of 0.05 m³ at a temperature 200°C, is being supplied 120 kJ of energy through heating. Find the final pressure and temperature. 

(b) One kg of an ideal gas is heated from 18.3°C to 93.4°C. Assuming R = 287 J/kg-K and  γ  = 1.18 for the gas. Find out (i) specific heats, (ii) change in internal energy, and (iii) change in enthalpy and entropy.

BEAMS, JOINTS AND SUPPORTS